Skip to content

Day and night line: (503) 555-0194

Ashworth Plumbing

Master Plumbers in Portland Metro. Price in writing before we start.

A third-generation family firm for homes, historic houses and commercial buildings. The $85 diagnostic is credited in full when you go ahead with the repair.

Family business since 1978. Median arrival across Portland Metro: 42 minutes.

01 Concerns

What worries people before they call a plumber

  1. 01

    The price changes halfway through

    You pay $85 for the diagnostic, then get an itemized price in writing before any work starts. It usually comes as two options: the repair that stops the problem now, and a longer-lasting fix.

  2. 02

    Someone is paid to find a bigger problem

    Our plumbers are full-time employees on an hourly wage. Nobody earns commission on what you buy, so a bigger diagnosis pays no one.

  3. 03

    Your plaster and original tile get broken

    On older houses we open walls surgically and work around the plaster and historic tile. A repipe ends with a labeled manifold, so you can see which line feeds what.

02 Rate and triage ledger

What the $85 diagnostic includes

We repair main and supply lines, sewers (camera inspection, jetting, trenchless lining), valves and pressure reducing valves. We also repipe whole houses, install tankless and hydronic boilers, find slab leaks and certify backflow assemblies.

$85 diagnostic, credited to your repair

Repair prices are flat-rate and in writing. If you know which part has failed, the shop desk can give you the standard range by phone. After hours (6 pm to 7 am and Sundays) mobilization is a flat $165, quoted before the truck leaves.

  • L-01A Master Plumber on site, with up to 45 minutes of instrument testing: pressure readings, thermal imaging and moisture mapping
  • L-02All $85 credited to your invoice if you go ahead with the repair
  • L-03An itemized flat-rate price in writing before any work begins, with no pressure to decide on the spot
  • L-04Every joint pressure-tested, and the work area swept and vacuumed before we leave
  • L-05A registered 10-year warranty on workmanship and joints

What we repair and install

Flat-rate price in writing before work begins

  • 01

    Main and supply line emergencies

    Burst or failed lines at the main and into the house. Dispatch answers 24/7; after hours (6 pm to 7 am and Sundays) mobilization is a flat $165, quoted before the truck leaves.

  • 02

    Sewer

    Camera inspection, hydro-jetting, trenchless lining, and replacement of clay, cast iron and Orangeburg pipe.

  • 03

    Whole-house repipe

    Type L copper or Uponor PEX-A, with plaster, trim and historic tile protected and a labeled manifold at the end.

  • 04

    Tankless and hydronic boilers

    Radiant floor loops, balancing of cast radiators, air and dirt separation, condensing and combi boilers.

  • 05

    Fittings, valves and PRVs

    Service of fittings and valves, and calibration of pressure reducing valves.

  • 06

    Slab leak detection

    Acoustic and helium tracer detection under the slab, located to within 6 inches.

  • 07

    Backflow certification

    Annual testing and rebuilds of RPZ and double-check assemblies for commercial and municipal accounts, reported to the city water authority.

The shop desk gives the standard price range by phone when you know which part has failed.

03 Protocol

How a dispatch works

  1. Step 01

    A dispatcher from our shop answers

    You reach a person at our shop, not an offshore call center or an AI bot. They help you find the main shutoff and send a truck carrying the right parts.

  2. Step 02

    We test before we talk price

    A Master Plumber arrives in a stocked truck, in boot covers, with pressure gauges, thermal imaging and a fiber-optic camera. The visit includes up to 45 minutes of testing.

  3. Step 03

    You get the price in writing

    Before any work begins you receive an itemized flat-rate ledger. Read it, ask questions and decide. There is no pressure to say yes on the spot.

  4. Step 04

    We test, tidy up and register the warranty

    Every joint is tested under water or air pressure. We sweep and vacuum the work area, mark main valves with brass tags and register your 10-year warranty.

04 Record

Since 1978: the numbers, and one job in detail

years of continuous work, since 1978
48
years of continuous work, since 1978
median arrival across Portland Metro
42 min
median arrival across Portland Metro
years of warranty on workmanship and joints
10
years of warranty on workmanship and joints
sales commission paid to our plumbers
0%
sales commission paid to our plumbers
commercial and residential umbrella insurance, and bonded
$5M
commercial and residential umbrella insurance, and bonded

Sample field log #2026-0842

One job, line by line

Property
1924 Craftsman Tudor, Laurelhurst
Work
140 ft of galvanized pipe replaced with Type L copper
Manifold
12 ports, every line labeled
Pressure reducing valve
Wilkins 600XL, set to 62 PSI
Flow
2.1 to 9.4 GPM
Pressure
94 to 62 PSI

Sample entry for the demo. More field logs are available on request.

supply94 PSI in62 PSI house12 ports, labeled

Where water enters the basement or crawl space. In an emergency, close it clockwise, or a quarter turn on a lever so it sits across the pipe, then open the lowest outside faucet to relieve the pressure.

Pressure reducing valve, illustrated

The valve holds the house line at 62 PSI.

An illustration of how a pressure reducing valve behaves, using the set point from field log #2026-0842. It is not a reading of your house.

05 Materials

What is on the truck, and what stays off it

Supply pipe

InstallType L hard copper and Uponor PEX-A

RefuseThin Type-M copper

Joints inside walls

InstallEvery joint pressure-tested before we close up

RefuseSharkBite push-to-connect fittings sealed inside a wall

Drain pipe

InstallTyler cast iron no-hub pipe

RefuseSchedule 20 PVC

Also on the truck

Forged DZR brass ball valves (Apollo, Webstone), tubular brass P-traps in 17 gauge, split-ring clevis hangers, and Cush-A-Clamp isolators every 4 feet.

06 Questions

Questions

Why do you charge $85 for a diagnostic?

The fee covers a Master Plumber at your property and up to 45 minutes of instrument testing: pressure readings, thermal imaging and moisture mapping. If you go ahead with the repair, the full $85 comes off your invoice.

Can I get a price over the phone?

If you know which part has failed, the shop desk can give you the standard price range. The firm price comes in writing after the diagnostic.

What do night and Sunday calls cost?

From 6 pm to 7 am and on Sundays, mobilization is a flat $165. We tell you on the phone before the truck leaves.

How do you repipe a house with original plaster and tile?

We repipe whole houses in Type L copper or Uponor PEX-A, opening walls surgically to protect the plaster and historic tile. Every joint is pressure-tested before we close up, and the work carries the 10-year warranty.

Who works in my home, and are they licensed?

Our own employees. Every plumber is full-time on payroll (W-2), holds an active Oregon or Washington Journeyman or Master license, and is paid by the hour with no sales commission. The firm holds Master License #MP-04819 and is bonded and insured, with a $5M umbrella.

How fast can you get here, and what do I do until then?

Median arrival across Portland Metro is 42 minutes, and dispatch answers 24/7. Until we arrive, find the main shutoff where water enters the basement or crawl space and close it: clockwise, or a quarter turn on a lever so it sits across the pipe. Then open the lowest outside faucet to relieve the pressure.

Read the price before we touch a pipe

The $85 diagnostic comes off your invoice if you go ahead with the repair. If water is running now, call (503) 555-0194: dispatch answers 24/7.

07 Dispatch intake

Tell dispatch what is happening

Tell us where the problem is and what you see. A dispatcher at our shop reads your request and contacts you to set up the diagnostic. If water is running now, call (503) 555-0194 instead.